Table 17.12. Pollen Results from Castle Rock Pueblo (5MT1825)
| General Provenience | Surface | Structure 206 | Structure 206 | Structure 206 | Structure 302 | Structure 401 |
| Sample Codea | 0-1 | 552-2 | 549-1-5 | 553-1-2 | 464-2-2 | 437-1-39 |
| Context | modern control | upper control | Floor 1 | Floor 1 | hearth | Floor 2 |
| ARBOREAL POLLEN | % | % | % | % | % | % |
| Abies | X | |||||
| Picea | 1.0 | X | 0.5 | |||
| Pseudotsuga | X | |||||
| Pinus edulis-type | 23.0 | 4.0 | 1.5 | 1.5 | 5.0 | 5.0 |
| Pinus ponderosa-type | 5.5 | 1.0 | 1.0 | X | 2.5 | |
| Pinus | 0.5 | 1.0 | 1.5 | |||
| Juniperus | 36.0 | 10.0 | 4.0 | 2.5 | 7.0 | 5.0 |
| Quercus | 2.0 | 0.5 | 1.0 | 1.0 | ||
| NONARBOREAL POLLEN | ||||||
| Low-spine Compositae | 1.0 | 6.0 | 2.5 | 0.5 | 2.0 | 3.5 |
| High-spine Compositae | 1.0 | 1.0 | ||||
| Artemisia | 12.0 | 2.0 | 3.5 | 9.0 | 3.0 | |
| Cheno-am | 15.0 | 59.0 | 73.0 | 81.0 | 60.0 | 46.0 |
| Sarcobatus | X | 3.0 | ||||
| Gramineae | 1.5 | 2.0 | 6.0 | 0.5 | 7.0 | 1.5 |
| Cruciferae | 0.5 | |||||
| Ephedra nevadensis-type | 0.5 | 1.0 | 1.0 | X | 0.5 | |
| Ephedra torreyana-type | 0.5 | |||||
| Erodium | 0.5 | |||||
| Sphaeralcea-type | X | |||||
| Cleome | 14.0 | 3.0 | 13.0 | 1.0 | ||
| Portulaca | 0.5 | |||||
| Umbelliferae | 0.5 | 1.0 | ||||
| Platyopuntia | X | |||||
| Zea | X | X | 1.5 | X | 2.0 | 24.5 |
| % Unknowns | 0.5 | 0.5 | 1.5 | 0.5 | 4.0 | 1.5 |
| Number of Grains Counted | 200 | 200 | 200 | 200 | 100 | 200 |
| Aggregatesb | (Ped-6) | Ch-200b | Lo-2a | none | none | Qu-2a |
| Ju-4a | Ch-2a | Ch-5b | ||||
| (Ju-100) | Cl-3a | Sar-2a | ||||
| (Ch-30) | Z-2a | |||||
| (Z-6) | ||||||
| Samples with IP: none | ||||||
X = pollen was identified during scan.
aThe first number in the two- or three-part sample code is a provenience indicator (PD), the second is a laboratory catalog number (FS), and the
third, when assigned, is a point location number (PL).
bAggregate code explanation: The letter or letters preceding the dash refer to the plant taxon (see Table 17.3); the number after the dash refers to
the estimated number of grains in the largest aggregate; and the letter following the number refers to the maximum number of aggregates
observed (a = 1, b = 2 to 5). Codes in parentheses indicate aggregates observed during the standard scan. Maximum number of aggregates
observed was not recorded for scans.